INJECTION VESTIGE: T3
DIRECT INJECTION NOZZLES , MULTI-CAVITY APPLICATION ONLY
- YES: frequent color change
- YES: intense colours
- NO: plastics that leave stringings / droolings while mould opens
- NO: plastics with melting temperature higher than 270°C
- NO: abrasive reinforcements
| Code | C - L | 1 | 2 | T(2) | 4/1 | * |
|---|---|---|---|---|---|---|
| UGDL3511MA | C=40 L=55 | UGDL341C | REPNSPDL31 | S151051000J | UGDL3500P | Z=0,14 |
| UGDL3512MA | C=60 L=75 | UGDL342C | REPNSPDL32 | S151051000J | UGDL3500P | Z=0,19 |
| UGDL3513MA | C=80 L=95 | UGDL343C | REPNSPDL33 | S151051000J | UGDL3500P | Z=0,24 |
| UGDL3514MA | C=100 L=115 | UGDL344C | REPNSPDL34 | S151551000J | UGDL3500P | Z=0,29 |
1 = Nozzle body
2 = Coil heater
T(2) = J Termocouple
4 = Cu-Be Tip
ØC = Standard: 6
Ød = standard: 1,5 ÷ 1,7 - on request 0,6 ÷ 3.2
* = Elongation (nozzle temperature - mould temperature = 200°C)
O-Ring on request
Do you want to download the PDF file of this article? Click on the button and the download will start immediately
Download Sheet
Do you want to download the 2D drawing of this article? Click on the button and the download will start immediately
Download Do you want to download the 3D drawing of this article? Click on the button and the download will start immediately
Download
We will be present at the 29th FAKUMA fair, we look forward to seeing you at ...
