INJECTION VESTIGE: T3
NOZZLES FOR DIRECT INJECTION ON THE PART
- YES: frequent color change
- YES: - intense colours NO - plastics leaving stringings /droolings while mould opens.
- NO: plastics with melting temperature higher than 250°C (single cavity applications)
- NO: plastics with melting temperature higher than a 270°C (multi cavity applications)
- NO: abrasive reinforcements
| Code | C - L | 1 | 2 | T(2) | 4/1 | * |
|---|---|---|---|---|---|---|
| UGDL5612MA | C=61 L=89 | UGDL562CM | REPNSP5001 | S151051000J | UGPUDL37CU | Z= 0,21 |
| UGDL5612SA | C=61 L=89 | UGDL562CS | REPNSP5001 | S151051000J | UGPUDL37CU | Z= 0,21 |
| UGDL5613MA | C=91 L=119 | UGDL563CM | REPNSP5002 | S151051000J | UGPUDL37CU | Z= 0,28 |
| UGDL5613SA | C=91 L=119 | UGDL563CS | REPNSP5002 | S151051000J | UGPUDL37CU | Z= 0,28 |
| UGDL5614MA | C=121 L=149 | UGDL564CM | REPNSP5003 | S151551000J | UGPUDL37CU | Z= 0,36 |
| UGDL5614SA | C=121 L=149 | UGDL564CS | REPNSP5003 | S151551000J | UGPUDL37CU | Z= 0,36 |
| UGDL5615MA | C=171 L=199 | UGDL565CM | REPNSP5004 | S152051000J | UGPUDL37CU | Z= 0,48 |
| UGDL5615SA | C=171 L=199 | UGDL565CS | REPNSP5004 | S152051000J | UGPUDL37CU | Z= 0,48 |
1 = Nozzle body
(M=MultiCavity / S=Single Cavity)
2 = Coil heater
T(2) = J Termocouple
4 = Cu-Be Tip
ØC = Standard: 9 on request 10
Ød = standard: 1,6 ÷ 1,7 - on request: 1,0 ÷ 4,5
* = Elongation (nozzle temperature - mould temperature = 200°C))
O-Ring on request
Do you want to download the PDF file of this article? Click on the button and the download will start immediately
Download Sheet
Do you want to download the 2D drawing of this article? Click on the button and the download will start immediately
Download Do you want to download the 3D drawing of this article? Click on the button and the download will start immediately
Download
We will be present at the 29th FAKUMA fair, we look forward to seeing you at ...
